DAF 95XF Series Manual page 275

1
95XF series
Installing height adjustment handle
1. Fit the plastic connection piece (5). Note the
position of the small slot (X) when installing
the new connection piece (5).
2. Fit the handle (4).
3. Install the plate (3).
4. If necessary, install the side covers.
5. Fit the seat squab.
4.23 REMOVAL AND INSTALLATION, FIXED SEAT HEIGHT ADJUSTMENT
HANDLE
Removing height adjustment handle
1. Remove the seat squab.
2. Remove the side cover (without
disconnecting the pipes from the valve).
3. Remove the stop (1), after which the
adjustment cable (2) can be lifted.
4. Remove the upper plate (3) by pushing it
out at position Y and pulling it from the
frame.
5. Remove the handle (4).
6. Remove the plastic connection piece (5).
Installing height adjustment handle
1. Fit the plastic connection piece (5). Note the
position of the small slot (X) when installing
the new connection piece (5).
2. Fit the handle (4).
3. Install the plate (3).
4. Install the adjustment cable and fit the
stop (1).
5. Fit the side cover.
6. Fit the seat squab.
0209
Removal and installation
5
X
1
2
SEATS
Y
3
1
4
2
K100509
Y
3
7
4
5
X
K100512
4-15