DAF 95XF Series Manual page 200

CAB SUSPENSION
Removal and installation
Installing front spring suspension
1. Fit the coil spring element and tighten the
attachment nut at the bottom to the
specified tightening torque. See "Technical
data".
2. Bring the cab bracket, stabiliser bar and coil
suspension element together in such a way
as to be able to install the cab bearing pin.
While installing, ensure that the recess in
the bearing pin aligns with the opening in
the locking bolt.
3. Fit the locking bolt for the cab bearing pin.
4. Fit the sealing plug using a plastic hammer.
5. Fit the grease lubrication connection nipple.
6. Connect the grease lubrication hose.
7. Carefully lower the cab.
5
8. Fit the cab grille, lower grille and the corner
pieces around the headlights.
4-8
1
95XF series
0209