DAF 95XF Series Manual page 82

INTERNAL CAB COMPONENTS
Removal and installation
6. Fit the window guide by first fitting the
fastening lip (1) of the window guide in the
recess (2) in the door. Now fit the
attachment bolt (3), but do not tighten it yet.
Slide up the window guide as far as
possible and tighten the attachment bolt (3).
7. If necessary, fit the locking mechanism of
the central door locking system.
2
Note:
The control rod of the central door locking
must be positioned behind the control rod of
the unlocking handle.
8. Fit new foil on the inside of the door.
9. Fit the door panel.
4-26
2
1
1
95XF series
3
K1 01 504
0209