DAF 95XF Series Manual page 86

INTERNAL CAB COMPONENTS
Removal and installation
4.25 REMOVAL AND INSTALLATION OF ROOF CONSOLE IN SPACE CAB AND
COMFORT CAB TO INSTALL ACCESSORIES
Note:
The roof console of the F95XF Space Cab
and Comfort Cab is hinged to allow good
access to the wiring behind it. The hinges (A)
include slotted holes (B) for the purpose of
2
adjusting the console in the longitudinal
direction of the vehicle. When opened the
console can be pulled several centimetres
backwards due to these slotted holes. As a
result of this the front edge has sufficient
space and will therefore not break.
Please ensure that no there are no loose
objects in the console that may fall out
during tilting.
Tilting roof console
1. Loosen the small guide rail socket head
screw and remove the guide rail from the
sun blind.
2. Support the console.
3. Slacken the 4 screws (C) in the upper edge.
4. Pull the console backwards as far as
possible (approx. 2 cm).
5. Tilt the console.
6. Make sure the console is not tilted too far.
This is to prevent the ends of the sun blind
mechanism from damaging the windscreen.
4-30
A
B
1
95XF series
C
K100552
K100437
0209