DAF 95XF Series Manual page 273

1
95XF series
1. Attach the air pipes of the handle (1) to the
cut air pipes. Use the same length as that
which was cut during removal.
2. Fit the handle (1) and secure it with the
screws (3).
3. Tighten the screw (2).
4. Fit the side cover on control side.
5. Fit the seat squab.
4.20 REMOVAL AND INSTALLATION, VERTICAL DAMPING ADJUSTER
Removing vertical damping adjuster
1. Remove the seat squab.
2. Remove the side cover on control side
(without disconnecting the air pipes from the
valves).
3. Remove the screws (1).
4. Remove the shock absorber cable (remove
the lock ring (2) in the lowest position of the
system, and kink the cable from its holder
(6) when the system is in the highest
position).
Installing vertical damping adjuster
1. Install the combined cable and mounting
plate assembly (3) and the control handle
through the opening in the rubber bellows
into the frame.
2. Secure the handle (2) with the screws (1).
3. Fit the side cover.
4. Install the adjustment cable (2.9.0) before
the seat cushion is fitted.
5. Adjust the cable before fitting the seat
squab; see "Installing the vertical damper".
6. Fit the seat squab.
0209
Removal and installation
3
SEATS
2
1
3
K100506
2
7
1
K100507
4-13