DAF 95XF Series Manual page 134

EXTERNAL CAB COMPONENTS
Removal and installation
4.5 REMOVAL AND INSTALLATION, FIXED DOOR WINDOW
Removing the fixed door window
1. Remove the drop glass.
2. Remove the window pillar by pressing the
inner and outer door plates slightly apart in
the centre.
3. Remove the fixed door window by placing a
suction pad, special tool (DAF no. 0484800)
on the inside and outside and pulling the
window with rubber seal carefully out of the
frame (tilt, if necessary).
4
Installing the fixed door window
1. Make sure that the window frame is smooth
and flat (no major irregularities).
2. Apply a lubricant to the outside of the
rubber seal.
3. Install the window using two suction pads,
special tool (DAF no.-0484800) in the door
frame. Tap the window properly and check
that the weatherstrip properly fits into the
door along the entire circumference.
4. Install the drop glass.
5. Clean the two windows (for example with
DAF window cleaning agent) and the parts
of the cab body which have become dirty
during installation of the windows.
4-8
1
95XF series
K1 01 527
200345