DAF 95XF Series Manual page 194

CAB SUSPENSION
Removal and installation
3. Manufacture an assembly fork from thin
sheet metal (see figure) to facilitate the
installation of the cab suspension.
4. Bring the cab bracket, stabiliser bar and
suspension element together in such a way
as to be able to install the cab bearing pin.
While installing, ensure that the recess in
the bearing pin aligns with the opening in
the locking bolt.
5. Fit the locking bolt.
6. Fit the sealing plug using a plastic hammer.
7. Fit the grease lubrication connection nipple.
8. Connect the grease lubrication pipes.
9. Carefully tilt the cab back.
10. Fit the cab grille, lower grille and the corner
pieces around the headlights.
5
4-2
1
A
A
1
95XF series
2
K100414
0209