DAF 95XF Series Manual page 262

SEATS
Removal and installation
4.2 REMOVAL AND INSTALLATION, SEAT SLIDE
Removing seat slide
1. Remove the entire seat.
2. Remove the 4 attachment screws (1).
3. Bend back the bent pins (2) on either side
and disassemble the bracket.
Installing seat slide
1. Install the bracket and bend the pin (2).
2. Fit the 4 attachment screws (1).
3. Install the entire seat.
4.3 REMOVAL AND INSTALLATION, SEAT SQUAB
Removing seat squab
1. Slide the seat squab to the frontmost
position (only for models with seat squab
adjustment (SKTE)).
2. Remove the electric wiring from models with
heated seats.
7
3. Push the control lever (1) up with a
screwdriver (insert the screwdriver between
frame -X- and the lever).
4. Pull the seat cushion forwards and up.
Installing seat squab
1. Slide the seat cushion approx. 20 cm into
the guides at the back.
2. At the same time, push the front of the seat
cushion down and slide it in the front
guides, until the lever (A) clicks into
position.
3. In the SKTE model, check after assembly
whether the adjuster engages in all
openings of the runner (1). If necessary,
push the runner to the left or the right.
4-2
1
1
3
2
X
A
1
95XF series
2
K100488
K100489
0209