DAF 95XF Series Manual page 269

1
95XF series
4.13 REMOVAL AND INSTALLATION, SEAT BELT LOCK
Removing seat belt lock
1. Remove the side cover panel opposite the
control side.
2. Remove the attachment bolt (1).
Installing seat belt lock
1. Fit the locking mechanism and tighten the
attachment bolt to the specified tightening
torque. See "Technical data".
2. Fit the side cover panel.
4.14 REMOVAL AND INSTALLATION, BACKREST AIR CUSHIONS (IPS SYSTEM)
Removing backrest air cushions (IPS
system)
1. Carefully remove part of the backrest cover
and slide it more than halfway upwards.
2. Remove the four screws (6) (IPS model
only).
3. Carefully remove the shaped foam at the
bottom of the frame.
4. Remove the pipes (1) (located underneath
the seat belt roll holder).
5. Remove the two clips (2) and remove the
air reservoir(s) (3).
6. Remove the side air reservoirs (5).
Installing backrest air cushions (IPS system)
1. Install the air reservoirs (3) and (5) and
secure them with the clips (2).
2. Connect the pipes.
3. Install the shaped foam.
4. Fit the 4 screws (6).
5. Fit the upholstery.
0209
Removal and installation
1
2
3
4
1
SEATS
K100500
7
6
5
K100501
4-9