DAF 95XF Series Manual page 68

INTERNAL CAB COMPONENTS
Removal and installation
4.11 REMOVAL AND INSTALLATION, STEERING COLUMN
Removing steering column
1. Set the steering gear in the central position,
check this using the marks on the steering
box.
2. Remove the steering column panels.
3. Disconnect the earth terminal from the
2
batteries.
4. Remove the steering wheel.
5. Remove the multi-function switches and the
ignition switch.
6. Remove the bracket holding the height
setting switch.
7. Disconnect the air pipes from the control
valve and plug the supply pipe.
8. Loosen one of the universal joints of the
steering shaft (which one depends on the
operation to be performed; either the
universal joint beneath the steering wheel or
the universal joint on the steering box).
Before loosening, mark the position of the
universal joint versus the steering shaft.
9. Remove the attachment bolts at the bottom
of the steering column.
10. Remove the steering column.
4-12
1
95XF series
S7 00 166
K100799
0209