DAF 95XF Series Manual page 209

1
95XF series
12. Position the air pipes and connect the
connector blocks.
13. Connect the clutch pipe.
14. Install the air conditioning pipes and secure
them using the attachment nuts.
15. Connect the cable and attach it to the
chassis.
16. Connect the heater hoses to the connector
pipes.
17. Connect the floor connectors and E-gas
connector.
18. In the case of a HGS shift control, connect
the pipes to the coupling piece. Ensure that
no dirt enters the pipes during assembly.
19. In the case of an MGS shift control, fit the
attachment bolts at the bottom of the rocker
strip and tighten them.
20. Install the engine noise insulation
underneath the cab.
21. Tilt the cab back to the driving position.
22. Install the roof hatch rim and the roof hatch
glass.
23. Fit the door rubbers to the left and right.
24. Fill and bleed the clutch main cylinder.
25. Fill the cooling system.
26. Connect the battery.
27. Let the engine idle and top up the cooling
system, if necessary.
28. If applicable, bleed the HGS switch control.
29. If applicable, fill the air conditioning system.
30. Check the lighting and all connections.
0209
CAB SUSPENSION
Removal and installation
V300156
4-17
5