DAF 95XF Series Manual page 279

1
95XF series
4.27 REMOVAL AND INSTALLATION, ADJUSTMENT CYLINDER
Removing adjustment cylinder
1. Remove the seat squab.
2. Lock the seat in its highest position.
3. Disconnect the air pipes (1) and (3) from the
adjustment cylinder.
4. Remove the retainer pin (4).
5. Remove the screw (5).
6. Push the metal plates that hold the cylinder
apart and remove the adjustment cylinder.
Installing adjustment cylinder
1. Push the metal plates that hold the cylinder
apart and insert the adjustment cylinder (2).
2. Install the retainer pin (4).
3. Connect the air pipes (1) and (3) to the
adjustment cylinder.
4. Tighten the screw (5) slightly during
installation.
5. Release the lock and operate the height
adjustment button (upwards). Check
whether the cylinder (2) moves freely. If not,
loosen screw (5) slightly.
6. Fit the seat squab.
0209
SEATS
Removal and installation
4
8
12
6
5
2 1
3
K100514
7
4-19