DAF 95XF Series Manual page 20

TECHNICAL DATA
Internal and external cab components
1.2 TIGHTENING TORQUES
0
The tightening torques stated in this section are
different from the standard tightening torques
included in the overview of standard tightening
torques. Any other threaded connections that
are not specified must therefore be tightened to
the tightening torque stated in the overview of
standard tightening torques.
When attachment bolts and nuts are to be
replaced, it is important that they are of exactly
the same length and property class as the ones
removed, unless stated otherwise.
Windscreen wiper unit
Motor shaft nut
Windscreen wiper arm nut
Windscreen wiper arm bracket lock nut M20
Threaded holes in bulkhead
windscreen wiper arm bracket
Clutch pedal
Sealant for end of clutch pedal spindle
Recessed locking bolt
Steering column
Universal joint attachment bolts
Steering wheel attachment nut
Door
Door limiter attachment nut M6
Hinge attachment bolts
Lock plate attachment bolts
Striker plate (cab)
Window crank attachment screw
Grille
Grille--side hinge attachment bolts
Threaded holes in bulkhead
Hinge on cab side
Exterior mirrors
Pavement mirror adjusting nut
Model with integrated arm:
attachment nut M8 for lower pivoting point of
D-shaped arm:
- driver's side
- co--driver's side
1-16
38 Nm
18 Nm
18 Nm
silicone sealant
silicone sealant
(1)
according to standard
(2)
54 Nm
65 Nm
10 Nm
30 Nm
(1)
18 Nm
23 Nm
(1)
according to standard
15 Nm
silicone sealant
7.0 - 8.1 Nm
22 Nm
27 Nm
1
95XF series
200345