DAF 95XF Series Manual page 276

SEATS
Removal and installation
4.24 REMOVAL AND INSTALLATION, BACKREST ADJUSTER
Removing backrest adjuster without
Y-section
1. Remove the seat squab.
2. Remove the side cover.
3. Fold the backrest forward until it stops.
4. Remove the screws (1) and (2) on control
side and on the opposite side.
5. Remove the lock rings (3) and (11).
6. Lift the spring (6) and pull the control plate
(4) from the axle, after which the rod (5) can
be removed.
7. Loosen the screw (7) of the backrest
adjuster and remove it.
8. Push the tooth segment assembly from the
bracket (9) until the wire (10) can be
removed.
Installing backrest adjuster without Y-section
1. Fit the adjuster together with the wire (10)
on one side.
2. Fit the wire (10) into the tooth segment
7
assembly at the other side.
3. Insert the screw (7) into the backrest
adjuster.
4. Lift the spring (6) and fit the control plate (4)
onto the axle, after which the wire (5) can
be fitted.
5. Connect the lock rings (3) and (11).
6. Insert the screws (1) and (2) on control side
and on the opposite side.
4-16
1
95XF series
4
3
6
11
5
8
10
1
9
7 2
K100511
0209