DAF 95XF Series Manual page 129

1
95XF series
Installing the door handle
1. Fit the door handle by first installing the
longest rod. Keep the door handle pressed.
Then install the shorter rod. Keep the key
turned clockwise (lock).
2. Fit the attachment bolts.
3. Fit the seals on the inside of the door.
4. Install the door panel.
4.3 REMOVAL AND INSTALLATION, DOOR LOCK
Removing the door lock
1. Remove the door handle.
2. Insert the key in the cylinder lock, use a
screwdriver to turn the ring (1) outwards
and remove the cylinder lock from the door
handle.
Installing the door lock
1. Turn the ring (1) outwards and position the
cylinder lock. Pay attention to the position of
the projection (A). Check whether ring (1)
makes proper contact.
2. Check the operation of the cylinder lock.
3. Fit the door handle.
200345
EXTERNAL CAB COMPONENTS
Removal and installation
4
K100423
A
1
K1 01 445
4-3