DAF 95XF Series Manual page 177

1
95XF series
5. Remove any excess glue with a plastic
spatula and smoothen the glued seam flat.
Glue remnants which are not yet dry can be
removed with the specified glue remover,
see "Technical data". Beads of glue which
have already set can only be removed
mechanically (cutting).
Note:
When using a glue remover, make sure this
does not come into contact with the area to
be glued, as this would seriously reduce the
quality of the glue bead.
Setting
The glue should set for at least 2 hours at 20_C
and 65% relative humidity before any further
treatment takes place.
Sealing the plastic window
Apply sealant (3) in the seam between window
(1) and polyester roof (2).
Seal with the specified sealant. See "Technical
data".
It will take 2 days (48 hours) before
the glue is entirely set. Until then
the vehicle must not be driven.
200345
EXTERNAL CAB COMPONENTS
Removal and installation
3
1
3
4
2
K1 01 484
4-51