DAF 95XF Series Manual page 125

1
95XF series
27 58
27
2. Pull the telescope out and fix it in the
extreme position.
3. Place the special tool (2)
(DAF no. 0694939) with the short bent side
in one of the nozzle tips and adjust by
turning it in such a manner that the long
side of the adjusting tool points to the
headlight glass.
4. Repeat this procedure for the other nozzle
tip.
Note:
The high-pressure pump of the headlight
washing system supplies a pressure of 2.5 bar.
The pipes from the pump to the washing system
are therefore armoured.
When replacing them, always make sure that
armoured pipes are fitted. From the
high-pressure pump there is one pipe to the
crosspiece. From the crosspiece there is one
pipe to the left-hand and one pipe to the
right-hand spray telescope. Both pipes must be
of the same length to ensure proper functioning
of the system.
200345
EXTERNAL CAB COMPONENTS
1
Inspection and adjustment
2
4
K100820
3-5