DAF 95XF Series Manual page 167

1
95XF series
Gluing the roof to the cab
See "Technical data" for the type of glue to be
used for the cab drip channel and the cab front
when gluing the roof onto the cab.
Pay attention to the following when installing the
roof onto the cab:
- Depending on the space available, apply 2
triangular beads of glue to the neck of the
pre-treated cab drip channel. The beads
should measure about 8x12 mm (wxh).
Give the spraying nozzle the shape shown
in the drawing.
- At approx. 10 mm from the top of the front
piece, apply a triangular bead of glue
measuring 8x12 mm (wxh). After positioning
the roof, apply a finishing bead of glue to
the front of the cab.
Setting:
It will take 2 days (48 hours) before
the glue is entirely set. Until then
the vehicle must not be driven.
200345
EXTERNAL CAB COMPONENTS
Removal and installation
12 mm
K1 00 721
4
4-41