DAF 95XF Series Manual page 67

1
95XF series
4.10 REMOVAL AND INSTALLATION, STEERING COLUMN PANELS
Removing steering column panels
1. Remove the floor mat.
2. Using the steering column setting, move the
steering wheel to its highest possible
position.
3. Remove the two covers under the steering
wheel. The right-hand side of the upper
cover (1) (windscreen wiper side) must be
released by lifting and sliding it across the
left handle (direction indicator).
4. Remove the lower panels to the left and
right of the steering column cover (4).
5. Remove the steering column cover (4) by
disconnecting the attachment screws (2)
and the panel clamps (3) on the back.
Installing steering column panels
1. Re-place the cover around the steering
column and make sure that the steering
column setting is working properly after
doing so.
2. Remove the panels to the left and right of
the steering column cover.
3. Fit the two covers beneath the steering
wheel. Make sure that the rubber dust
covers on the handles are properly in place.
4. Place the floor mat.
0209
INTERNAL CAB COMPONENTS
Removal and installation
1
3
2
2
2
4
K1 01 490
4-11