DAF 95XF Series Manual page 173

1
95XF series
3. Use a brush to apply a single (or at most 2)
thin, covering layer of the specified primer,
in accordance with the supplier's
instructions, see "Technical data". Allow this
layer to dry for at least 30 minutes but no
more than 24 hours at room temperature.
When the roof is new
1. Tape up the edges of the area to be glued
with thin, smooth, adhesive tape.
2. Clean the area to be glued with a clean,
non-pilling cloth moistened with the
specified cleaning agent, see "Technical
data".
3. Then lightly sand the area to be glued with
the specified abrasive, see "Technical data".
4. Clean the area to be glued once again with
a clean, non-pilling cloth moistened with the
specified cleaning agent, see "Technical
data". Allow the cleaned surface to dry for at
least 10 minutes at room temperature.
5. In places where there is no primer layer,
use a brush to apply a single (or at most 2)
thin, covering layer of the specified primer in
accordance with the supplier's instructions,
see "Technical data". Allow this layer to dry
for at least 30 minutes but no more than 8
hours at room temperature.
200345
EXTERNAL CAB COMPONENTS
Removal and installation
4
4-47