DAF 95XF Series Manual page 272

SEATS
Removal and installation
4.18 REMOVAL AND INSTALLATION, HEIGHT ADJUSTMENT VALVE
Removing height adjustment valve
1. Remove the seat squab.
2. Place the seat in the highest tilting position.
3. Remove the screws (1).
4. Disconnect the air pipes from the valve.
5. Remove the valve (2).
Installing height adjustment valve
1. Connect the air pipes to the valve (2).
2. Secure the valve (2) with the screws (1).
3. Fit the seat squab.
4.19 REMOVAL AND INSTALLATION, RAPID-LOWERING HANDLE
Removing rapid-lowering handle
1. Remove the seat squab.
2. Cut the air pipes of the rapid-lowering
control handle according to size X
(X = 130).
7
3. Remove the side cover on control side.
4. Slightly loosen the screw (2).
5. Remove the screws (3) from the
rapid-lowering handle and remove the
handle along the upper side.
Installing rapid-lowering handle
Note:
To install a new handle, it must be reconnected
to the cut section X (repair kit includes handle
and sections of pipe and connection pieces).
4-12
2
1
1
95XF series
K100505
2
1
3
K100506
0209