DAF 95XF Series Manual page 230

CAB TILTING MECHANISM
Removal and installation
Installing cab tilting pump seals
1. Fit a new O-ring to the lever axle.
2. Fit the holder to the lever axle. Tap the pin
into its holder and the lever axle. Secure
the pin as shown in the opposite figure.
3. Fit the filter and the magnet to the pump
housing.
4. Fit the reservoir with a new gasket to the
6
pump housing, using the 4 Torx bolts.
5. Install the cab tilting pump.
4-6
1
95XF series
K1 01 498
K100137
0209