DAF 95XF Series Manual page 69

1
95XF series
Installing steering column
1. Fit the universal joint on the splines of the
steering shaft or steering box. Line up the
groove (A) in the clutch with mark (B) on the
steering shaft or steering box.
Check that the universal joint is
correctly in place on the steering
shaft or steering box so that the
attachment bolt can be put in the
notch (C).
2. Only fit a new attachment bolt with nut to
the universal joint. Tighten the bolt to the
specified tightening torque, see "Technical
data".
3. Connect the air pipes to the control valve.
4. Fit the bracket holding the height setting
switch.
5. Fit the ignition lock and multi-function
switches.
6. Install the steering column panels.
7. Fit the steering wheel.
0209
INTERNAL CAB COMPONENTS
Removal and installation
B
A
C
K1 01 353
K100434
4-13
2