DAF 95XF Series Manual page 102

CAB HEATING
Removal and installation
Installing heating unit
Note:
Please ensure that the bowden cables are not
pinched off when the heating unit or dashboard
panels are installed. After installation, check the
operation of the heating unit.
1. Install the heating unit and connect the
hoses at the front of the cab.
2. Fasten the heating unit to the front of the
cab and the cab floor. Fit the interior filter
housing.
3
3. Connect the connector on the side of the
central cabinet.
4. Install the upper air duct on driver's side.
5. Place the central console upper frame and
hand-tighten it (lift the dashboard panel on
driver's side slightly to make installation
easier).
6. Install the central console front panel and
tighten both frame parts.
7. Connect the connector of the central
console control panel.
8. Fit the instrument panel, radio panel, control
panel, dashboard panels, ashtray and
ashtray holder.
9. Top up the cooling system.
10. If relevant, fill the air conditioning system.
4-4
1
95XF series
0209