DAF 95XF Series Manual page 274

SEATS
Removal and installation
4.21 REMOVAL AND INSTALLATION, SEAT TILTING HANDLE
Removing seat tilting handle
1. Remove the seat squab.
2. Remove the springs (1) and (4).
3. Remove the plastic connection piece (2) by
sliding it towards the backrest.
4. Remove the control button (3) by lifting it
and pulling it out.
Installing seat tilting handle
1. Fit the seat tilting handle (3).
2. Fit the plastic connection piece (2). Note the
position of the small slot (X) when fitting the
new connection piece (2).
3. Fit the springs (1) and (4).
4. Fit the seat squab.
4.22 REMOVAL AND INSTALLATION, HEIGHT ADJUSTMENT HANDLE
Removing height adjustment handle
1. Remove the seat squab.
2. If necessary, remove the side covers
7
(without disconnecting the air pipes from the
valves).
3. Remove the screw (1) and the plastic
connection piece (2).
4. Remove the upper plate (3) by pushing it
out at position Y and pulling it from the
frame.
5. Remove the handle (4).
6. Remove the plastic connection piece (5).
4-14
1
95XF series
1
4
X
2
3
K100508
Y
3
1
4
5
X
2
K100509
0209