DAF 95XF Series Manual page 270

SEATS
Removal and installation
4.15 REMOVAL AND INSTALLATION, HEATING ELEMENTS
Removing seat squab heating element
1. Remove the seat squab.
2. Remove the connector (3) from the electric
wiring.
3. Remove the seat squab cover.
4. Carefully remove the heating element (1)
from the shaped foam (use a knife, if
necessary).
Removing backrest heating element
1. Pull the backrest cover up as far as the
white loop for the padding thread, without
removing the backrest cover.
2. Carefully remove the heating element (2)
from the shaped foam (use a knife, if
necessary).
Installing seat squab heating element
1. Install a new heating element (1) and
secure it with double-sided adhesive tape.
2. Connect the connector (3) of the heating
element (1).
3. Fit the upholstery.
7
Installing backrest heating element
1. Install a new heating element (2) and
secure it with double-sided adhesive tape.
2. Connect the connector (3) of the heating
element (2).
3. Fit the upholstery.
4-10
95XF series
1
2
3
K100502
0209
1