Nortel DMS-100 Series Maintenance Manual page 71

Line conditions for operator verification
Line condition
Line with cutoff on
disconnect option
(continued)
Characteristics
Line goes off-hook during
verification
Attempt to activate
custom calling feature
Line has the
cutoff-on-disconnect
(COD) option
—end—
DMS-100 Family SMS Maintenance Manual XPM10 and up
Maintenance overview 1-55
DMS response
Normal access connection
retained. Customer does not
receive dial tone
System ignores transient state
while line line verification occurs
Operator can obtain a
verification connection. If the
party that is not verify goes
on-hook, the system takes the
call down. Operating company
personnel receive a busy tone
(60 ipm).