Nortel DMS-100 Series Maintenance Manual page 276

7-70 Card replacement procedures
NT6X78
SMS
(continued)
8
9
At the MAP terminal
10
297-8231-550 Standard 09.01 August 1998
Open the locking levers on the replacement card. Align the card with the slots
in the shelf and gently slide the card into the shelf.
Seat and lock the card.
a.
Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b. Close the locking levers.
Load the CMR card by typing
>LOADPM UNIT unit_no CMR
and pressing the Enter key.
where
unit_no is the number of the unit containing the faulty CMR card