Nortel DMS-100 Series Maintenance Manual page 176

6-12 Alarm clearing procedures
PM SMS
major
(continued)
13
14
15
16
297-8231-550 Standard 09.01 August 1998
To return the inactive unit to service, type
>RTS UNIT unit_no
and press the Enter key.
where
unit_no is the number of the inactive unit
If RTS
passes
fails
Perform the procedure "Updating static data." When you return to this
procedure, go to step 15.
Determine if the system cleared the ISTb fault.
If the system
cleared the ISTb fault
did not clear the ISTb fault
To determine the load that the SMS that has faults can use, type
>QUERYPM CNTRS
and press the Enter key.
Example of a MAP response:
UNSOLICITED MSG LIMIT = 250, UNIT0 = 0, UNIT1 = 0
UNIT 0:
RAM LOAD: SU33BF
ROM LOAD: SMSRFA10
UNIT 1:
RAM LOAD: SU33BF
ROM LOAD: SMSRFA10
Note: Dashed box highlights the correct SMS load.
Do
step 38
step 37
Do
step 38
step 37