Application
Use this procedure to remove from service C-side links between an
XMS–based peripheral module (XPM) and the network. Use this procedure
for both junctored networks (JNET) and enhanced networks (ENET).
This procedure assumes that the user posted the peripheral module (PM) and
the PM is available for query. Instructions in the main procedure direct the
user to post the PM again after the user completes this common procedure.
Action
This procedure contains a summary flowchart and a list of steps. Use the
flowchart to review the procedure. Follow the steps to perform the
procedure.
7-141
Card replacement common procedures
Manually busying SMS C-side links
DMS-100 Family SMS Maintenance Manual XPM10 and up
7-141
7-141