At the frame
10
WARNING
Static electricity damage
Before removing any cards, put on a wrist strap and
connect it to the wrist strap grounding point on the left
side of the frame supervisory panel of the SMS. This
protects the equipment against damage caused by
static electricity.
WARNING
Equipment damage
Take the following precautions when removing or
inserting a card:
1. Do not apply direct pressure to the components.
2. Do not force the cards into the slots.
Put on a wrist strap.
11
Remove the NT7X05 card as shown in the following figures.
a.
Locate the card to be removed on the appropriate shelf.
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-113
SMS
NT7X05
(continued)
FW-xxxxx