Nortel DMS-100 Series Maintenance Manual page 258

Subscriber carrier module-100s

Hide thumbs Also See for DMS-100 Series:

Table of Contents

7-52 Card replacement procedures

297-8231-550 Standard 09.01 August 1998

Open the locking levers on the card to be replaced and gently pull the card

toward you until it clears the shelf.

Verify the replacement card has the same PEC, including suffix, as the card

you just removed.

Open the locking levers on the replacement card. Align the card with the slots

in the shelf and gently slide the card into the shelf.

Seat and lock the card.

Using your fingers or thumbs, push on the upper and lower edges of the

faceplate to ensure the card is fully seated in the shelf.

Troubleshooting