Nortel DMS-100 Series Maintenance Manual page 452

12-14 Routine maintenance procedures
Testing the dead system alarm
SMS
(continued)
7
8
9
10
11
12
13
14
15
16
297-8231-550 Standard 09.01 August 1998
To access system table ALMSD, type
>TABLE ALMSD
and press the Enter key.
To position on the field bearing the name of the SD group, type
>POS sd_group
and press the Enter key.
where
sd_group is the SD group name identified in step 5
To list the table, type
>LIST
and press the Enter key.
Note the entry under SDGROUP.
To exit from the table, type
>QUIT
and press the Enter key.
To access system table ALMSDGRP, type
>TABLE ALMSDGRP
and press the Enter key.
To position on the field noted in step 10, type
>POS sd_group
and press the Enter key.
where
sd_group is the SD group noted in step 10.
To list the entries, type
>LIST
and press the Enter key.
Note the entries under TMTYPE, TMNO and CARDCODE. This information
identifies the location of the card.
To exit the table, type
>QUIT
and press the Enter key.