Nortel DMS-100 Series Maintenance Manual page 311

Subscriber carrier module-100s

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Open the locking levers on the replacement card. Align the card with the slots

in the shelf and gently slide the card into the shelf.

Seat and lock the card.

Using your fingers or thumbs, push on the upper and lower edges of the

faceplate to ensure the card is fully seated in the shelf.

Close the locking levers.

DMS-100 Family SMS Maintenance Manual XPM10 and up

Card replacement procedures 7-105

Troubleshooting