Nortel DMS-100 Series Maintenance Manual page 179

unit_no is the number of the inactive unit
If test
passes
fails, and the system produces a
card list
fails, and the system does not
produce a card list
28 Check the card list that appears at the MAP terminal.
Example of a MAP display:
Site Flr RPos
HOST 00 M07
HOST 00 M07
HOST 00 M07
HOST 00 M07
If you
replaced all the cards on the list
did not replace all the cards on
the list
29 Go to the SMS card replacement procedures section in this document and
replace the next card on the list. Return to this procedure, and go to step 27.
30 To return the inactive unit to service, type
>RTS UNIT unit_no
and press the Enter key.
where
unit_no is the number of the inactive unit
If RTS
passes
fails
Bay_id Shf Description Slot EqPEC
SME 00 51 SMS : 000
SME 00 51 SMS : 000
SME 00 65 SMS : 000
SME 00 51 SMS : 000
DMS-100 Family SMS Maintenance Manual XPM10 and up
Alarm clearing procedures 6-15
major
(continued)
Do
step 30
step 28
step 37
08 6X45
22 6X40
22 6X40
12 6X45
Do
step 37
step 29
Do
step 38
step 37
PM SMS
FW-xxxxx