Nortel DMS-100 Series Maintenance Manual page 152

4-16 Converting from Mode I to Mode II
9 Two protection links were deleted when the remote converted to Mode II
297-8231-550 Standard 09.01 August 1998
ENTER Y TO CONFIRM, N TO REJECT OR E TO EDIT.
>Y
WARNING: Static data not updated for SMS 0
You must BSY and RTS the SMS
TUPLE CHANGED
JOURNAL FILE INACTIVE
back to table RCSINV. To add these two links to the two remotes from
where the links were borrowed, type
>POS rcs no
>CHA
>QUIT
Example:
>POS REM1 00 1
>CHA
Step through the fields until the PROT field appears. Press the Enter key
to step through the fields.
PROT: N
>Y
PORT:
>9
Step through the fields that remain until the tuple to change appears.
ENTER Y TO CONFIRM, N TO REJECT OR E TO EDIT.
>Y
TUPLE CHANGED
JOURNAL FILE INACTIVE
Repeat this procedure for REM1 00 3. Specify the original PORT
number of the remote. The original PORT number is 19.
>QUIT