Clearing an SMS alarm
Alarm condition
Minor
Clearing an RCS alarm
Faults that occur in a remote concentrator SLC-96 (RCS) raise an alarm.
The system sends these alarms to the log subsystem as PM128 logs at the
MAP terminal. The PM128 logs contain the reasons for the alarms and
actions to follow to clear the alarm. The Clearing an SMS alarm table
contains this information.
(continued)
Possible cause
Non-software cards have
faults.
DMS-100 Family SMS Maintenance Manual XPM10 and up
—end—
Troubleshooting chart 10-5
Action
Proceed as follows:
1
Silence the alarm.
2
Identify the SMS unit in
the ISTb condition.
3
Post the SMS unit in the
ISTb condition.
4
Identify the problems with
the posted SMS unit.
5
Busy and test the posted
SMS unit.
6
Return to service the
posted SMS unit.