Nortel DMS-100 Series Maintenance Manual page 163

6 To load the SMS from the CC, type
>LOADPM PM
and press the Enter key.
If the load
passes
fails
7 To return the peripheral module (PM) to service, type
>RTS PM
and press the Enter key.
If system response
is RTS PASSED on both units
is RTS FAILED on one unit
is RTS FAILED on both units
8
To test the manually busy (ManB) unit, type
>TST UNIT unit_no
and press the Enter key.
where
unit_no is the number of the tested SMS unit (0 or 1)
If the system response
is TST PASSED
is TST FAILED
is TST FAILED with card list
9 To return the ManB unit to service, type
>RTS UNIT unit_no
and press the Enter key.
where
DMS-100 Family SMS Maintenance Manual XPM10 and up
Recovery procedures 5-7
Recovering
an SMS
(continued)
Do
step 7
step 12
Do
step 13
step 8
step 12
Do
step 9
step 12
step 11