Nortel DMS-100 Series Maintenance Manual page 289

Replacing an NT6X85 card in an SMS
At your Current Location
1 Proceed only if you have been directed to this card replacement procedure from
a step in a maintenance procedure, are using the procedure for verifying or
accepting cards, or have been directed to this procedure by your maintenance
support group.
2
Obtain a replacement card. Verify the replacement card has the same product
engineering code (PEC), including suffix, as the card to be removed and the
dual in-line package (DIP) switch settings are the same as the card being
replaced.
At the MAP terminal
3 Access the PM level of the MAP display by typing
>MAPCI;MTC;PM;POST SMS sms_no
and pressing the Enter key
where
sms_no is 0–127 for NT40 and 0–255 for DMS SuperNode
Example of a MAP response
SMS 3 INSV
Unit0 Act
Unit1 Inact
LINKS_OOS
InSv
ISTb
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-83
SMS
CSIDE 0 PSIDE 1
NT6X85
(continued)