a.
Locate the card to be removed on the appropriate shelf.
b.
Open the locking levers on the card to be replaced and gently pull the card
toward you until it clears the shelf.
c.
Ensure the replacement card has the same PEC, including suffix, as the
card you just removed. Also ensure that all replacement card dip switch
settings match settings of the card just removed. Ensure that dip switch S1
(if equipped) is in the XPM position.
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-133
SMS
NTMX77
(continued)