Nortel DMS-100 Series Maintenance Manual page 205

4 To perform a SwAct, type
>SWACT UNIT unit_no
and press the Enter key.
MAP prompt:
A Cold SwAct will be performed
This action will take this PM and all of
Its Subtending Nodes temporarily out of service
and <n> active terminals may be affected
Please confirm ("YES" or "NO"):
To affirm the request, type
>YES
and press the Enter key.
Example of a MAP response:
XPM 0 SwAct Passed
If SwAct
passes
fails
5 For additional help, contact the next level of support.
6 The procedure is complete. Return to the main procedure that sent you to this
procedure and continue as directed.
Alarm clearing common procedures 6-41
DMS-100 Family SMS Maintenance Manual XPM10 and up
Updating static data Updating static data
XPM XPM
(continued)
Do
step 6
step 5
(end)