Nortel DMS-100 Series Maintenance Manual page 168

6-4 Alarm clearing procedures
PM SMS PM SMS
critical critical
(continued) (end)
Clearing a PM SMS critical alarm
At the MAP terminal
1
2
3
4
5
297-8231-550 Standard 09.01 August 1998
To access the MTC level and silence the alarm, type
>MAPCI;MTC;SIL
and press the Enter key.
To access the PM level and identify the SMS module that is in a critical state,
type
>PM;DISP STATE SYSB SMS
and press the Enter key.
Example of a MAP response:
SMS 0
To post SysB SMS, type
>POST SMS sms_no
and press the Enter key.
where
sms_no is 0–127 for an NT40 and 0–255 for the DMS SuperNode.
Example of a MAP response
SMS SysB
PM 1
SMS 1
SMS 0 SysB Links_OOS:
Unit 0: InAct
Unit 1: Act
To identify the problems with the posted SMS, type
>QUERYPM FLT
and press the Enter key.
Proceed immediately to the SMS recovery procedures section in this
document.
ManB OffL CBsy
0 10
0 0
CSide 0, PSide 0
SysB
SysB
ISTb InSv
0 0 130
0 0 4