7-8 Card replacement procedures
NT2X70
SMS
(continued)
13
297-8231-550 Standard 09.01 August 1998
c.
Holding the card by the face plate, slide the card along the guides until the
card is free from the shelf.
d.
Verify the replacement card has the same PEC, including suffix, as the card
you just removed.
WARNING
Equipment damage
Take these precautions when removing or inserting a
card:
1. Do not apply direct pressure to the components.
2. Do not force the cards into the slots.
Insert the NT2X70 power converter replacement card as shown in the following
figures.
a.
Hold the card by the face plate with the components visible on the
right-hand side.