b.
Close the locking levers.
14
Use the following information to determine where to go next in this procedure.
If you entered this procedure
from
alarm clearing procedures
other
15
Test the inactive unit by typing
>TST UNIT unit_no
and pressing the Enter key.
where
unit_no
is the number of the faulty SMS unit
If TST
passed
failed
16
Return the inactive SMS unit to service by typing
>RTS UNIT unit_no
and pressing the Enter key.
where
DMS-100 Family SMS Maintenance Manual XPM10 and up
Card replacement procedures 7-79
SMS
Do
step 17
step 15
Do
step 16
step 17
NT6X80
(continued)