Nortel DMS-100 Series Maintenance Manual page 239

Subscriber carrier module-100s

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Set the PM to the ROM level by typing

>PMRESET UNIT unit_no NORUN

and pressing the Enter key.

is the number of the faulty SMS unit

At the frame

Static electricity damage

Before removing any cards, put on a wrist strap and

connect it to the wrist strap grounding point on the left

side of the frame supervisory panel of the SMS. This

protects the equipment against damage caused by

static electricity.

Put on a wrist strap.

Equipment damage

When removing or inserting a card, do not apply

direct pressure to the components and do not force the

cards into the slots.

Remove the NT6X41 card as shown in the following figures.

DMS-100 Family SMS Maintenance Manual XPM10 and up

Card replacement procedures 7-33

Troubleshooting