Nortel DMS-100 Series Maintenance Manual page 482

A --18 Appendix
SHELF
A
B
C
D
Value of 0 = unequipped line, Value of 1 = equipped line
Rt config, All chnl bsy, pWrk trc, aBbt, Set ln config
Disp ln config status, disp ln config Image
cHnl aud, send Cfield msg, Line, sMsr, *
We can verify if the audit has detected the change and sent the information to
the CM by dumping the "line config image" information. The image
information is the status of the line the last time that the audit ran. If the
information in the "image" does not match the information in the "status", then
the audit has not yet detected the change. Once the "image" and "status" tables
match, we know that the audit has run on that RT.
Rt config, All chnl bsy, pWrk trc, aBbt, Set ln config
Disp ln config status, disp ln config Image
cHnl aud, send Cfield msg, Line, sMsr, *
UP:SMsm> i 1
SHELF
A
B
C
Value of 0 = unequipped line, Value of 1 = equipped line
Rt config, All chnl bsy, pWrk trc, aBbt, Set ln config
Disp ln config status, disp ln config Image
cHnl aud, send Cfield msg, Line, sMsr, *
UP:SMsm> i 1
OPEN WRITING XPMTLC0001SMS.AA02 2000/04/13 11:31:50
SLOTS: 1| 2| 3| 4| 5| 6| 7| 8| 9| A| B| C|
11|11|11|11|11|11|11|11|11|11|11|11|
11|11|11|11|11|11|11|11|11|11|11|11|
11|11|11|11|11|11|11|11|11|11|11|11|
11|11|11|11|11|11|11|11|11|11|11|11|
SLOTS: 1| 2| 3| 4| 5| 6| 7| 8| 9| A| B| C|
10|11|11|11|11|11|11|11|11|11|11|11|
11|11|11|11|11|11|11|11|11|11|11|11|
11|11|11|11|11|11|11|11|11|11|11|11|
D 11|11|11|11|11|11|11|11|11|11|11|11|