Table of Contents
Advertisement
Fig. 13
@
²
Fig. 14
³
Fig. 15
4
Using the Eye Shades
When Wearing Eyeglasses
Use with eye shades in their normal folded-down position. This will pre-
vent eyeglasses from being scratched by the eyepieces.
When Not Wearing Eyeglasses
Extend the folded eyeshades in the direction of the arrow. This makes
observation easier by preventing the inverse incidence of light from be-
tween the eyepieces and your eyes.
5
Mounting the Eyepiece Micrometer Disk
When the WHN10X-H eyepieces are used, an eyepiece micrometer disk
can be mounted.
Use 24 mm dia. x 1.5 mm thick micrometer disks.
Following Fig. 14, turn the built-in micrometer-mounting frame ² to the
arrow direction to remove it from the eyepiece and place a micrometer
disk @ into the mounting frame so that the surface with the model indi-
cation faces downward.
}The micrometer-mounting frame may be tight for certain micrometer disks.
In this case, turn the frame by holding the circumference with a light,
uniform force or by applying the frame against a rubber sheet. Do not
grasp the frame with a strong force, as this may deform the frame and
make it harder to remove it.
Re-attach the micrometer mounting frame in the original position.
}Be careful not to touch the lens surface with your finger.
6
Selecting the Light Path
@
Slide the light path selector lever @ to select the desired light path.
²
Light path selector lever
Pushed in
Pulled out
7
Switching the Monaural/Stereo View
}Slide the mono/stereo selector lever ² for stereo observation based on
pupil division.
Mono/stereo selector lever
Pushed in*
Pulled out
* The brightness of the peripheral section of the field becomes insufficient
when the aperture iris diaphragm knob ³ is stopped down.
Indication
Intensity Ratio
100% for binocular assembly.
100% for TV observation and
photomicrography.
Indication
STEREO
MONO
MVX10
(Fig. 13)
(Fig. 14)
(Fig. 15)
(Fig. 15)
Observation
Stereo
Standard
17
Hide quick links:
Advertisement
Table of Contents
