Date/Time Setup; Setup Utilities; Print Setup Report - GE MAC 1600 Operator's Manual

Date/Time Setup

Setup Utilities

Print Setup Report

2028451-182B
The Date/Time Setup function allows you to configure the MAC 1600
system's date and time settings.
To reach Date/Time Setup from the MAC 1600 Main Menu, press F5
(System Configuration) > F6 (More) > F6 (More) > F6 (More) > F1 (Date/
Time Setup).
The following table identifies the settings on Date/Time Setup.
Field
Date
Time
Time Zone
Adjust clock for daylight
savings time
The setup utilities available in System Configuration allow you to print,
switch, export, and import system settings and export the audit trail.
The Print Setup Report utility prints a report of individual settings or the
complete system settings. You may use the report to verify that all MAC
1600 devices are configured identically or to reference if you need to
reconfigure a device.
Use the following instructions to print a setup report.
1. From the Main Menu, press F5 (System Configuration) > F6 (More) >
F3 (Print Setup Report).
2. On the Print Setup Report window, select the report to print.
MAC™ 1600
Comment
Sets the current system date. The format of the fields
depends on the date format selected on Country Setup.
For more information, refer to
page 9-23.
Sets the current system time. If the Automatically
Synchronize with Time Server field is set on Basic Setup,
any changes made to the time will be overwritten during
the next synchronization. For more information, refer to
"Basic Setup" on page 9-2.
Identifies the time zone in which the device is located.
Available only if Automatically synchronize with Time
Server is enabled in Basic Setup. Refer to
page 9-2 for more information.
Determines whether the system will automatically adjust
the system time for daylight savings time. Available only if
Automatically synchronize with Time Server is enabled in
Basic Setup. Refer to "Basic Setup"
information.
System Configuration
"Country Setup" on
"Basic Setup" on
on page 9-2 for more
9-31