Manual Copy To; Number Of Copies; Interpretation; Print Interpretation - GE MAC 1200 Operator's Manual

Manual Copy To

Number of Copies

Delete ECG After Transmission
Autosave ECG

Interpretation

Print Interpretation

10-6
System Setup: Automatic Mode
When the key is pressed, the unit will print a copy of the ECG
[ECG], or the ECG is sent to a host system (CardioSys, CardioSoft, and/
or MUSE CV systems).
If you do not want to print the ECG, but only collect data or send the
ECG to a PC, select 0 (message on display: REC OFF). When a number
greater than 1 is selected, multiple copies of the reports will be printed.
Default: [1]
(MAC 1200/1200 ST with Memory Option MEMO Only)
Stored ECGs that were successfully sent to a host system via the RS232
interface will be cleared from the recorder memory. Default: [no]
If this menu item is set to Yes and ECGs have already been sent from the
recorder memory, these ECGs will be deleted after the next transmission
of a stored ECG.
(MAC 1200/1200 ST with Memory Option MEMO Only)
After report generation, the ECG will or will not be automatically saved
to the internal memory: [no], yes.
If Yes is selected, the unit will generate an interpretation of the ECG
data.
If Yes is selected, the interpretation will be printed with the report.
Interpretations will always be sent to CardioSys, CardioSoft or MUSE
system regardless of the Print Interpretation setting.
MAC 1200/1200 ST
2012250-021
Revision C