Displaying Measured Values And Information On Connected Sensors/Actuators - WAGO 765-1205/100-000 Product Manual

765-1205/100-000 Commissioning

10.3.1.3.2 Displaying Measured Values and Information on Connected Sensors/Actuators

Figure 13: Information Tab, Port X0i Menu Item (Example View)
The Information tab shows the following information:
• The measured values and states of the port diagnostics
• The information on connected sensors/actuators
Displaying Pin- and Port-Specific Measured Values and States
The Information tab shows the following current measured values for each of pin 1, pin 2
and pin 4 of the selected port:
• Temperature of the pin, measured in °C
• Voltage on the pin, measured in volts
• Current flowing through the pin, measured in amperes
• State of the connection pin
States of the Connection Pin
The possible states of the connection pin are:
• OK
• Short circuit
• Module-internal overload protection has triggered
• Module-internal overtemperature protection has triggered
• Module-internal overvoltage protection has triggered
• Overcurrent
• Undercurrent
• Overtemperature
• Undertemperature
• Overvoltage
• Undervoltage
• Module-internal watchdog timer has elapsed
Product manual | Version: 2.0.0 61
8DIO FLD EC DC 24V 2.0A